The Nordberg MP Series cone crusher used to only stand for maximum power. They are designed to have a high capacity and crushing force for size reduction. MP800 brings a high capacity cone crusher that solves the energy efficiency problems.
MP800 cone crusher brings cone crusher performance to a new level. MP no longer stands for Maximum Power, but now MP is Maximum Performance. This crusher still does provide the highest crushing power for any cone crusher in similar size.
Advanced crushing dynamics leads to more work per cycle. The cone crusher increases power draw so that will lead to an increase in capacity, and a higher power-to-production ratio giving energy efficiency too. So MP800 not only performs for you, but also performs to help with a cost-saving operation.
Nordberg MP800 cone crusher parts Including:
| Part Number | DescriPtion | Crusher Type | Weight |
| 1001614606 | VALVE NEEDLE, P/N 00508 REV A | MP800 | 0.420 |
| 1006530150 | CLUTCH BACK STOP CLUTCH/ MODEL 750 | MP800 | 34.000 |
| 1007249566 | V-RING V-95A, TWVA00950 | MP800 | 0.010 |
| 1021790057 | BRAKE 95C-4-A-4-B064 | MP800 | 20.870 |
| 1022075485 | ECCENTRIC BUSHING | MP800 | 321.000 |
| 1022147761 | HEAD BUSHING LOW | MP800 | 380.000 |
| 1022147770 | HEAD BUSHING UPR | MP800 | 129.000 |
| 1025300016 | TORQUE LIMITER FOR USE ON ANTI-SPIN | MP800 | 25.000 |
| 1031140006 | ECCENTRIC MACHINING | MP800 | 2,413.000 |
| 1031405058 | ANALOG OUTPUT 1746-NO4I | MP800 | 0.190 |
| 1031405088 | PLC 1747-L551 | MP800 | 0.500 |
| 1031483001 | FILTER ELEMENT P150695 | MP800 | 4.630 |
| 1035702021 | O-RING AS568-908-16.36X2.20-NBR90 | MP800 | 0.002 |
| 1035718178 | O-RING 23.62″ID X 25.37″OD X .875″THK, | MP800 | 1.060 |
| 1036831546 | PINION SPIRAL-BEVEL | MP800 | 265.000 |
| 1036831566 | BEVEL GEAR | MP800 | 930.000 |
| 1038069630 | CNTRSHFT BOX GRD | MP800 | 136.000 |
| 1046861003 | DRIVE SHAFT ASSEMBLY FOR USE ON (TORQUE | MP800 | 57.000 |
| 1047000100 | KEY SPINDLE | MP800 | 0.260 |
| 1048315201 | BOWL LINER STANDARD MEDIUM | MP800 | 4,132.000 |
| 1048315250 | BOWL LINER SHORT HEAD – FINE | MP800 | 3,908.000 |
| 1048315255 | BOWL LINER SHORT HEAD – MEDIUM | MP800 | 4,451.000 |
| 1048519601 | MAIN FRAME LINER | MP800 | 1,514.000 |
| 1048724031 | SOCKET LINER | MP800 | 221.000 |
| 1050143900 | MANTLE STANDARD | MP800 | 4,347.000 |
| 1050143950 | MANTLE SHORT HEAD | MP800 | 4,987.000 |
| 1050143953 | MANTLE SHORT HEAD MEDIUM INTERMEDIATE | MP800 | 4,700.000 |
| 1050230067 | HYDR MOTOR #1 P/N TGS-119-M-S-T OR #2 P | MP800 | 15.420 |
| 1055988665 | FEED PLATE | MP800 | 316.000 |
| 1055988668 | FEED PLATE SHORT HEAD – FINE | MP800 | 394.000 |
| 1057610201 | THRUST BRNG UPR | MP800 | 133.000 |
| 1057610203 | THRUST BRNG FOR USE WITH ECC BUSHING OI | MP800 | 119.000 |
| 1059423041 | PUMP HYD POWER UNIT | MP800 | 20.000 |
| 1061030423 | PLANETARY DRIVE RATIO 19.54:1, #130L-E- | MP800 | 81.360 |
| 1061879702 | CLAMPING RING | MP800 | 2,024.000 |
| 1062731725 | LOCKING NUT | MP800 | 248.000 |
| 1062731728 | NUT LOCK SH HD – FINE | MP800 | 700.000 |
| 1063193002 | WEAR RING 2″ WIDE X 25.25″ BORE, APPROX | MP800 | 0.450 |
| 1063510100 | RING SEGMENT SEAL, (MAIN FRAME) | MP800 | 1.360 |
| 1063510101 | RING SEGMENT SEAL, (LOWER COUNTERWEIGHT | MP800 | 1.360 |
| 1063510102 | RING SEGMENT SEAL, (UPPER HEAD) | MP800 | 1.390 |
| 1063510103 | RING SEGMENT SEAL, (UPPER COUNTERWEIGHT | MP800 | 1.810 |
| 1063518905 | SEAL ADJUSTMENT CAP | MP800 | 5.370 |
| 1063915737 | TORCH RING | MP800 | 20.000 |
| 1074620056 | SPINDLE FOR USE ON TORQUE LIMITER ANTI- | MP800 | 17.000 |
| 1076086250 | SCREEN USED W/ TORQUE LIMITER ANTI-SPIN | MP800 | 0.220 |
| 1079624000 | GAUGE THREAD WEAR, 14.00″LG | MP800 | 0.640 |
| 1079840188 | TEMP SENSOR | MP800 | 0.240 |
| 1094200033 | HYDR DRIVE ASSEMBLY | MP800 | 140.000 |
| 1094200187 | FEED PLATE ASSY MP800 SHORT HEAD – FINE | MP800 | 1,100.000 |
| 1094200192 | ROLLER ASSY | MP800 | 2.700 |
| 1094200304 | HEAD ASSY FOR USE WITH DRIVESHAFT/TORQUE | MP800 | 9,235.000 |
| 1094205036 | SOCKET SUB-ASSEMBLY | MP800 | 382.000 |
| 1094205045 | TRAMP RELEASE CYL SUB-ASSEMBLY | MP800 | 308.000 |
| 1094290423 | CHARG & GAUG ASSY ACCUMULATOR INFLATION | MP800 | 1.290 |
| 1094300295 | CLAMPING CYL ASSY | MP800 | 23.180 |
| 1094300651 | PRSSR TRANSMITTER PRESSURE TRANSDUCER A | MP800 | 0.590 |
| 10P0323104 | BEARING 53-695-884-001, REPLACEMENT INBO | MP800 | 0.000 |
| 10P0323105 | BEARING 53-695-885-001,REPLACEMENT OUTBO | MP800 | 0.000 |
| 10P0323107 | TEMP SENSOR REPLACEMENT MTR STATOR RTD | MP800 | 0.090 |
| 10P0323108 | TEMPERATURE SENSOR BEARING RTD | MP800 | 0.000 |
| 10P0809202 | MOTOR SUPPORT P/N 58-389-006-513, SLIDE | MP800 | 0.000 |
| 10P0835101 | JACKSHAFT ITEM 1-1 ON DWG MM0281442 REF | MP800 | 317.513 |
| 10P0835102 | COUPLING MOTOR, ITEM 1- ON DWG MM028144 | MP800 | 0.000 |
| 10P1018901 | BOWL LINER MODIFIED, SH HD MEDIUM | MP800 | 4,414.000 |
| 10P1018902 | MANTLE MODIFIED, SH HD MEDIUM INTERMEDI | MP800 | 4,414.000 |
| 10P9722705 | COUPLING KEY MACHINED | MP800 | 1.043 |
| MM0200184 | SHEAVE ASSY MOTOR, 36.25″OD W/ “W” BUSH | MP800 | 612.000 |
| MM0200194 | COUPLING JACKSHAFT, 4.4965″ BORE/1.00″X. | MP800 | 397.000 |
| MM0201259 | PUMP ASSY P/N P7500C367AXSPLNY2500ASPLN | MP800 | 91.000 |
| MM0201261 | ELECTRIC MOTOR 30HP/1760RPM/286TC FRM/4 | MP800 | 220.000 |
| MM0201459 | TORQUE LIMITER ASSEMBLY, S/B MM0328986 | MP800 | 47.000 |
| MM0242211 | RELIEF VALVE RVPP-12-N-S-0-30/19 | MP800 | 0.000 |
| MM0261895 | BLOWER ASSY, 380V/3PH/50HZ/182T NEMA/SEV | MP800 | 131.000 |
| MM0262640 | ELCTRC MOTOR 30HP/1500RPM/286TC FRM/380 | MP800 | 0.000 |
| MM0309282 | ULTRASONIC SENSOR 7ML1118-1BA30 | MP800 | 1.300 |
| MM0309526 | PRESSURE SENSOR PN2221 | MP800 | 0.300 |
| MM0309602 | ETHERN INTRFACEMOD 305FX-ST | MP800 | 0.340 |
| MM0309688 | TEMP TRANSMITTER HR-WP-201TR20(0-200 C)- | MP800 | 0.050 |
| MM0314033 | BOWL LINER SHORT HEAD COARSE | MP800 | 3,561.000 |
| MM0318558 | COOLER ASSY AIR,(2X)OCS2000D,10HP/380/3 | MP800 | 2,552.000 |
| MM0318560 | COOLER ASSY AIR,(1X)OCS2000D,256T,MASTE | MP800 | 1,190.000 |
| MM0335977 | COUPLING ASSY FALK P/N 1130T10 | MP800 | 86.800 |
| MM0344228 | HEAD BUSHING UPR WITH OIL GROOVE | MP800 | 129.000 |
| N03461023 | COUPLING TYPE L190, 685144-12301 | MP800 | 3.080 |
| N05228077 | TRANSMITTER CMSS530-100A-MR-ISO | MP800 | 0.580 |