According to Metso, the HP900 is an upgrade to the HP800 cone crusher that has more than 175 installations. About 80 percent of the parts are compatible between the two technologies.
The HP900 comes with improved kinematics, a raised pivot point and a power increase, which leads to a 15 percent capacity increase, Metso says. A new lubrication system is included to support the new performance level.
The HP800 and HP900 cone crusher is delivered pre-assembled, pre-wired and factory tested. The equipment is packaged with a rubber pad-mounted subframe and guards, allowing for quick and safe setup with a compact footprint. These factors result in reducing installation time by 50 percent, Metso adds.
With the tramp-release system, the new crusher allows passage of tramp iron to minimize production stoppages and protect internal components. Top-service access to the head, shaft, eccentric and other major components make disassembly safe and easy.
Nordberg HP800 and HP900 cone crusher parts Including:
Part Number | Description | Crusher Type | Weight |
1001603714 | CHECK VALVE P/N CVFP-12-N-0-005, CHOKE C | HP800 | 0.290 |
1001603716 | CHECK VALVE PILOT OPERATED, P/N POCI-10 | HP800 | 0.160 |
1001603755 | PLUG ORIFICE, SAE WITH 0.026″ DIA ORIFI | HP800 | 0.000 |
1001603757 | PLUG ORIFICE, SAE WITH 0.093″ DIA ORIFI | HP800 | 0.010 |
1001614602 | VALVE W/MOD’S PER DWG, NEEDLE TYPE, P/N | HP800 | 0.200 |
1001623523 | PRESSURE RELIEF VALVE PARKER RAH 101 D50 | HP800 | 0.190 |
1001623524 | PRESSURE RELIEF VALVE RELIEF TYPE, P/N R | HP800 | 0.180 |
1001623526 | PRESSURE RELIEF VALVE RVDA-10-N-S-0-50/3 | HP800 | 0.180 |
1001690017 | SHUTTLE VALVE P/N BDSV-10-N-3-0 | HP800 | 0.140 |
1001697909 | PRESSURE REDUCING VALVE 350 PSI, P/N PRP | HP800 | 0.190 |
1001738082 | SAFETY VALVE RELIEF VALVE (SET TO 150 PS | HP800 | 9.390 |
1002077195 | UNION 1.875″-12UNF-2A, O-RING TYPE, 24 F | HP800 | 0.510 |
1003725634 | BOLT HEX ISO4014-M30X90-8.8-UNPLTD | HP800 | 0.710 |
1003894084 | FILTER ELEMENT S/B MM0297258 | HP800 | 1.510 |
1005194218 | PRESSURE SWITCH SET TO CLOSE AT 2200 PSI | HP800 | 0.907 |
1005194219 | PRESSURE SWITCH SET TO CLOSE 2500-2550 | HP800 | 0.907 |
1005465512 | RET RING 5.125″IDX0.072″ THK, RS-512 | HP800 | 0.040 |
1017557223 | V-BELT 8V/355/SET OF 3 BANDED, 14 TOTAL | HP800 | 94.000 |
1019559608 | BOLT LOCK HP800 | HP800 | 136.000 |
1019584408 | BOLT SQUARE HEAD M56 X 5.5-6G X 140 MM | HP800 | 5.400 |
1019584409 | BOLT SQUARE HEAD M56 X 5.5-6G X 170MM L | HP800 | 5.860 |
1020057058 | BOWL SHORT HEAD, HP800, PHASE 1, ALSO WF | HP800 | 8,400.000 |
1021790058 | BRAKE 92B-3-B-2-G043-B | HP800 | 9.100 |
1022066795 | CNTRSHFT BUSHING MACHINING | HP800 | 3.300 |
1022075464 | ECCENTRIC BUSHING | HP800 | 211.000 |
1022147711 | HEAD BUSHING UPR | HP800 | 81.000 |
1022147721 | HEAD BUSHING LOW | HP800 | 253.000 |
1022147723 | HEAD BUSHING LOW | HP800 | 302.000 |
1026740193 | HEAT EXCHANGER 2 PASS TCF TYPE, 90/10 C | HP800 | 50.267 |
1026888195 | FLEXIBLE COUPLING 1.250″ BORE PUMP, 0.3 | HP800 | 1.060 |
1026889923 | COUPLING FOR JACK SHAFT | HP800 | 180.000 |
1026889924 | FLEXIBLE COUPLING | HP800 | 651.810 |
1026950074 | PIPE UNION NH1650X300X0650 | HP800 | 4.200 |
1030415068 | FEED DISTRIBUTOR | HP800 | 320.000 |
1031143668 | ECCENTRIC | HP800 | 2,151.000 |
1031402026 | INST KITS AIMING, P/N EASY AIMER-2 / 5 | HP800 | 2.270 |
1031402051 | SENSOR ULTRASONIC LEVEL DETECTOR, MP’S | HP800 | 2.700 |
1031409015 | ELECTRONIC PART 56K LAN MODEM FOR TC AUT | HP800 | 0.000 |
1031409018 | PROCESSOR UNIT MICROLOGIX 1500 PROCESSO | HP800 | 0.400 |
1031409029 | END CAP 1769-ECR | HP800 | 0.130 |
1035718177 | O-RING 20.47″ID X 22.22″OD X .875″THK, 6 | HP800 | 0.960 |
1035718180 | O-RING 21.20″ID X 22.45″OD X .625″THK, | HP800 | 0.520 |
1036831540 | PINION SPIRAL BEVEL HP800 | HP800 | 186.000 |
1036831550 | PINION CONIFLEXED | HP800 | 214.000 |
1036831560 | BEVEL GEAR SPIRAL BEVEL GEAR | HP800 | 608.000 |
1038018752 | GUARD STATIONARY COUNTERWEIGHT | HP800 | 152.000 |
1038069628 | CNTRSHFT BOX GRD | HP800 | 22.400 |
1038069629 | CNTRSHFT BOX GRD HP800 | HP800 | 76.200 |
1038069733 | ARM GRD | HP800 | 151.950 |
1042472605 | HEAD MACHINING | HP800 | 5,382.000 |
1044252010 | HOSE ASSEMBLY 0.38″ID X 8.70″LG, W/2 SW | HP800 | 0.270 |
1044252028 | HOSE ASSEMBLY 0.375″ID X 11.800″LG, W/1 | HP800 | 0.280 |
1044252037 | HOSE ASSEMBLY .38″IDX17.1″LG, W/2 FLARE | HP800 | 0.320 |
1044252051 | HOSE ASSY .38″ID X 14.4″LG, W/1 FLARE & | HP800 | 0.440 |
1044252538 | HOSE ASSEMBLY .38″ID X 29.3″LG, W/1 FLA | HP800 | 0.590 |
1044254083 | HOSE ASSEMBLY 0.75″ID X 33.90″LG W/1 ML | HP800 | 0.700 |
1045376433 | CNTRSHFT BOX | HP800 | 766.000 |
1048314344 | BOWL LINER STD X-COARSE | HP800 | 3,120.000 |
1048314364 | BOWL LINER SHORT HEAD, MEDIUM | HP800 | 4,121.000 |
1048517411 | MAIN FRAME LINER | HP800 | 700.000 |
1048517581 | FRAME SEAT LINER SET OF 6 | HP800 | 48.000 |
1048724025 | SOCKET LINER | HP800 | 196.000 |
1050143810 | MANTLE SH HD-MED & CSE | HP800 | 2,687.000 |
1050143849 | MANTLE STANDARD | HP800 | 3,075.000 |
1050143852 | MANTLE SHORT HEAD, MEDIUM & FINE | HP800 | 4,543.000 |
1050230068 | HYDR MOTOR OILGEAR HYDURA HYDRAULIC DRIV | HP800 | 31.000 |
1050230079 | HYDRAULIC MOTOR OILGEAR HYDURA, P/N GS0 | HP800 | 32.900 |
1054268776 | CLEVIS PIN TRAMP RELEASE CYLINDER | HP800 | 8.660 |
1055981161 | FEED PLATE | HP800 | 82.000 |
1055981162 | FEED PLATE | HP800 | 130.000 |
1057612405 | THRUST BRNG | HP800 | 89.000 |
1057612406 | THRUST BRNG LOWER | HP800 | 78.000 |
1057612407 | THRUST BRNG LOW | HP800 | 78.000 |
1057612434 | HEAD BALL | HP800 | 249.000 |
1059422506 | PUMP OIL PUMP, OIL GEAR PVW-20, P/N GS00 | HP800 | 31.000 |
1059428075 | PUMP ASSEMBLY OIL, W/O RELIEF VALVE, 3′ | HP800 | 73.000 |
1059640387 | REDUCER C SIZE, 2.80:1 RATIO, 3-551-032 | HP800 | 39.460 |
1061876265 | CLAMPING RING | HP800 | 1,316.000 |
1061877930 | ADJSTM RING | HP800 | 6,383.000 |
1062440052 | RING DRIVER | HP800 | 590.000 |
1062807444 | OIL FLINGER | HP800 | 21.000 |
1062870306 | O-RING FOR HYD DRIVE RETRO FIT KIT 94399 | HP800 | 0.020 |
1062870307 | SEAL O-RING SEAL, P/N 2-250 | HP800 | 0.020 |
1063192525 | WEAR RING ROD, 88.9″ID, 3.18″ SECTION, 1 | HP800 | 0.020 |
1063193001 | PISTON WEAR RING 1.5″W X 21.907″ BORE, | HP800 | 0.330 |
1063518520 | SEAL RING SEGMENT | HP800 | 0.907 |
1063518530 | SEAL RING SEGMENT | HP800 | 1.360 |
1063518785 | RING SEGMENT SEAL | HP800 | 1.360 |
1063519865 | DUST SEAL DUST SHELL SEAL | HP800 | 3.629 |
1063915673 | TORCH RING | HP800 | 24.490 |
1063917765 | CNTRWGHT LINER | HP800 | 324.000 |
1068636577 | CNTRSHFT | HP800 | 241.000 |
1068868598 | MAIN SHAFT FINISHED | HP800 | 2,225.000 |
1072926702 | WEAR RING HEAD – MACHING | HP800 | 19.900 |
1073044087 | SPACER | HP800 | 0.620 |
1073817098 | SOCKET | HP800 | 222.000 |
1079141222 | PRSSR ACCUMULATOR POWER UNIT, 1.0 GAL-ST | HP800 | 16.290 |
1079141224 | PRESSURE ACCUMULATOR 1.0 GALLON, 3000 PS | HP800 | 36.000 |
1079142722 | PRSSR ACCUMULATOR 2.5 GAL, #24 SAE PORT | HP800 | 36.360 |
1079844029 | ADAPTER E30024 | HP800 | 0.100 |
1083390657 | VALVE ASSY VALVE MODULE | HP800 | 62.000 |
1086343192 | WEDGE | HP800 | 8.600 |
1086428470 | CNTRWGHT | HP800 | 1,929.000 |
1093070001 | CLAMPING CYL | HP800 | 11.670 |
1093070002 | CLAMP CYL REP KIT | HP800 | 0.040 |
1093070045 | TRAMP RELEASE CYL | HP800 | 214.000 |
1093070046 | REPAIRING KIT HP800 TRAMP RELEASE CYLIN | HP800 | 0.690 |
1093080001 | SOCKET ASSY | HP800 | 413.000 |
1093080005 | TRAMP RELEASE ASSY | HP800 | 3,016.000 |
1093080009 | BOWL ASSEMBLY SHORT HEAD | HP800 | 9,658.000 |
1093080073 | HEAD ASSY | HP800 | 6,025.000 |
1093080079 | CNTRSHFT ASSY OUTER BSHG GRV AT 6:00 O’C | HP800 | 1,403.000 |
1093080117 | BOWL ASSY STANDARD | HP800 | 10,706.000 |
1093080118 | BOWL ASSY SHORT HEAD | HP800 | 10,521.000 |
1093080129 | ADJSTM RING ASSY | HP800 | 8,551.000 |
1093080144 | ECCENTRIC ASSY STRAIGHT BEVEL GEAR | HP800 | 5,248.000 |
1093080167 | VIBR SNSR ASSY SKF SYSTEM, S/B MM0222 | HP800 | 93.000 |
1093080180 | CNTRSHFT BOX ASSY DIRECT DRIVE, 6:00 GRO | HP800 | 1,400.000 |
1093080219 | CNTRSHFT BOX ASSY 6:00 O’CLOCK GROOVE, S | HP800 | 1,400.000 |
1093085007 | TIE-ROD KIT MANIFOLD | HP800 | 0.180 |
1093085008 | SEAL KIT MANIFOLD O-RING KIT | HP800 | 0.010 |
1093085016 | PRSSR ACCUMULATOR ASSY, 2.5 GAL – STD, # | HP800 | 36.000 |
1093085022 | CNTRWGHT SUB-ASSEMBLY | HP800 | 2,253.000 |
1093085026 | HYDRAULIC DRIVE UNIT SUBASSEMBLY | HP800 | 128.000 |
1093085027 | HYDRAULIC DRIVE UNIT GEARBOX RATIO 117- | HP800 | 149.000 |
1093085029 | ADJSTM RING SUB-ASSEMBLY | HP800 | 6,853.000 |
1093085033 | ECCENTRIC SUB-ASSEMBLY | HP800 | 3,062.000 |
1093085034 | HYDR DRIVE | HP800 | 146.000 |
1093085042 | MAIN FRAME ASSY SUB ASSEMBLY | HP800 | 18,160.000 |
1094399989 | BLADDER ASSEMBLY P/N R2.5-101-10 | HP800 | 1.470 |
1094400127 | REPAIRING KIT 2.50″-15, R11-102 | HP800 | 0.400 |
1094400147 | REPAIRING KIT BLADDER REPAIR KIT, P/N 08 | HP800 | 0.520 |
1094506043 | CONTROL BOX P.B. CONTROL BOX | HP800 | 0.000 |
1094506606 | HYDRAULIC POWER UNIT MOTOR ADJUSTMENT | HP800 | 0.000 |
10P0113701 | JACKSHAFT 4140 ANNEALED | HP800 | 418.000 |
10P0113702 | KEY SHEAVE | HP800 | 2.858 |
10P0428101 | GRID MODULE COVER GRID ASSEMBLY + | HP800 | 0.000 |
10P0428102 | GRID SHAFT COUPLING T-GRID, P/N 0758257 | HP800 | 5.440 |
10P0430608 | COVER COUPLING COVER TYPE T20 SIZE 1140T | HP800 | 0.000 |
10P0820703 | BRNG INBOARD JACKSHAFT INBOARD P.B. BEA | HP800 | 0.000 |
17-107-513-207 | THERMOWELL 1.25 NPTM X M30 INTERNAL TEF | HP800 | 0.110 |
MM0200329 | MAIN FRAME ASSY W / ECCENTRIC BUSHING R | HP800 | 19,595.000 |
MM0218101 | PRSSR TRANSMITTER IFM EFECTOR P/N 2221, | HP800 | 0.300 |
MM0222107 | VIBR SNSR ASSY SKF SYSTEM, ANALOG ONLY | HP800 | 87.000 |
MM0226766 | PRSSR TRANSMITTER 8W2D44K12, ONE SERIES | HP800 | 0.970 |
MM0232175 | PRESSURE SWITCH ASSEMBLY PS-3 RETROFIT K | HP800 | 1.050 |
MM0235083 | ELCTRC MOTOR 20HP/1180RPM/286T FR/460V/ | HP800 | 130.000 |
MM0239120 | BRACKET TURNING, FOR SHORT BOWL | HP800 | 16.800 |
MM0239581 | LEVEL DETECTOR CONTROLLER 7ML5004-1AA10 | HP800 | 3.180 |
MM0241495 | REMOTE HANDSET 7ML1830-2AN | HP800 | 0.000 |
MM0275088 | HYDR POWER UNIT ORDER DWG/380V/3PH/50HZ | HP800 | 907.000 |
MM0309211 | POWER SUPPLY RETROFIT KIT, 24VDC, 300W, | HP800 | 1.500 |
MM0323822 | PILLOW BLOCK SAF 532 | HP800 | 66.500 |
MM0347063 | PRSSR REL VALVE RVPP-10-N-S-0-50/2950PSI | HP800 | 0.680 |
N02125059 | THERMOSTAT ATEMNC | HP800 | 0.408 |
N02125711 | AIR BREATHER MODEL NO. SF6710, 2000 PSI | HP800 | 1.220 |
N02150054 | PUMP P7500C367AXSPLNY3000ASPLNY301DVS | HP800 | 77.560 |
N02154802 | HEAT EXCHANGER ITT P/ N HCF-B-06048 | HP800 | 49.440 |
N02445170 | DIRECTIONAL VALVE DSG-03-3C-4-A200-0-N- | HP800 | 3.740 |
N02445872 | SOLENOID VALVE EMDV-10-N-3A-0-230A-G | HP800 | 0.830 |
N02445873 | SOLENOID VALVE EMDV-10-N-C2-0-230A-G | HP800 | 0.840 |
N02445874 | SOLENOID VALVE EMDV-12-N-4AQ-230A-G | HP800 | 1.000 |
N02445875 | SOLENOID VALVE EMDV-12-N-01-0-230A-G | HP800 | 1.000 |
N02445876 | SOLENOID VALVE SV3-10-0-0-240A-G | HP800 | 1.000 |
N02445877 | SOLENOID VALVE EMDV-12N-C2-1STA-230A-G | HP800 | 1.000 |
N02445957 | DIRECTIONAL VALVE D3W4C-NJWF | HP800 | 6.360 |
N02445960 | SOLENOID VALVE SV3-10-0-0-24-DG | HP800 | 0.520 |
N02445963 | SOLENOID VALVE EMDV-12-N-4A0-24-DG | HP800 | 1.030 |
N02445969 | SOLENOID VALVE DSL101C-D024LD | HP800 | 0.540 |
N02445970 | SOLENOID VALVE DS162C-D024 | HP800 | 1.240 |
N02445971 | SOLENOID VALVE SBV11-12-0-024DG | HP800 | 0.180 |
N02456156 | PILOT OPERATED CHECK VALVE POC1-10-F-0-0 | HP800 | 0.200 |
N02480792 | PUMP PVP41 36 L2 P | HP800 | 26.000 |
N02482201 | FLOW CONTROL VALVE 67173 | HP800 | 13.630 |
N02482859 | PROTECTION TUBE 67808 | HP800 | 0.450 |
N02495159 | PROGR LOGICCTRLLER MICROLOGIX 1500 BASE | HP800 | 1.100 |
N02495160 | MEMORY 1764-MM1 | HP800 | 0.010 |
N02495454 | BREAKER 1492-GH010 | HP800 | 0.000 |
N02495455 | RELAY 700-HK36Z24 | HP800 | 0.000 |
N02495939 | FUSE HOLDER 1492-H6 | HP800 | 0.000 |
N05228038 | PROXIMITY SW BI10-G30-YOX | HP800 | 0.190 |
N05256355 | PUSH BUTTON 800TC-FXJ6D4 | HP800 | 0.000 |
N05256423 | ELCTRC CABLE NETWORK CABLE, 1761-CBL-PM | HP800 | 0.030 |
N07503100 | GREASE 80878, MOLY GRADE ANTI-SEIZE M42 | HP800 | 21.940 |